Timbren Canada | Tundra Suspension Upgrade | Rubber Springs

Toyota Tundra with a snorkel kit and Timbren Canada suspension towing a side by side

If you’re planning to use your Toyota Tundra as a work truck, you’re probably going to need some sort of suspension upgrade. If you’re wondering why let’s discuss this important matter. We’ll begin with the independent suspension on the front end.

What is an independent suspension? 

Independent suspensions – sometimes called a ‘wishbone’ because the upper and lower control arms often resemble a wishbone on a turkey – most often combine coil springs together with upper and lower control arms. This construction allows the wheels to act independently of one another. If one side hits a bump or a dip, it acts independently of the other side. This helps smooth out the ride and keeps the truck from rocking side to side as it does with a solid axle suspension. Nearly all pickups today have independent front suspensions, and the 2021 Toyota Tundra pickup is no exception.

Timbren Canada Upgraded Suspension on Tundra

On the other hand, the rear suspension is comprised of three-leaf springs mounted between the frame and a solid axle. As strong as you might think they are, the rear suspension on the Toyota Tundra has its limitations:

The Problem

  • Front suspension

Like most pickups today, the Toyota Tundra is designed to ride like a luxury sedan. However, increased ride quality means reduced load-bearing strength. Accordingly, when the front-end squats, the weight of the vehicle shifts forward which reduces the amount of traction on the rear tires.  Furthermore, too much weight on the front end can throw the steering out and damage the suspension.

  • Rear suspension

Over the years, suspensions for pickups have evolved. Even though that may be true, the rear suspension on the Toyota Tundra continues to favor a leaf spring setup rather than a coil-over. Believe it or not, with enough added weight, the rear end will squat. When this happens, the weight of the vehicle shifts backward reducing the amount of traction on the front tires which will impact steering ability. Not only that, too much weight on the rear suspension can cause instability such as roll and sway. As you’ve probably guessed, this instability is dangerous and will require the driver to slow down to a crawl.

Timbren Canada | Rear suspension leaf spring on a Tundra

The Solution

In a perfect world, there would be no such thing as a suspension that squats. But in the real world, we’ve grown used to watching the front-end of our pickups sag under the weight of a plow. And we fully expect the rear-end to sag when we hook up a heavy trailer.

But it doesn’t have to be that way. At Timbren, we believe that each problem contains the seed of an effective solution. Timbren SES products are designed to make suspensions work better by addressing the miseries associated with the above-mentioned problems. 

Timbren Canada rubber springs for Tundra Timbren Canada bump stops for Tundra with mounting hardware

 

1. Load leveling

Timbren SES products will keep your pickup level even under the heaviest loads. Why? Because of the progressive spring rate of the Aeon® hollow rubber springs. As the load increases, so does the resistance provided by the Aeon® springs! This is a characteristic that is unique to Aeon® hollow rubber springs.

2. Smoothness

Unlike air ride suspensions that require an additional shock absorber, Aeon® hollow rubber springs absorb road shock while under load allowing the existing shock absorber to deliver a ride that is soft and smooth.

3. Strength & reliability

There’s a reason why Timbren products come with a lifetime warranty. It’s because Aeon® springs are “stronger than steel, and more reliable than air.” Once again, the progressive spring rate of an Aeon® spring makes it possible to carry far more than steel helpers. *Timbren SES kits can provide half tonne pickups with up to an additional 8,000 lbs. of carrying capacity and up to 12,000 lbs for 3500 models.

The strength and simplicity of an Aeon® spring provide you with a suspension system that requires zero maintenance. Unlike an airbag setup, a Timbren SES kit has no pipes, hoses, or compressors that increase the likelihood of system failure. Thus, the Timbren SES product is deemed “more reliable than air.”

tundra with Timbren Canada upgrade suspension pulling a tundra on a trailer

As you can see, if your Toyota Tundra has become your work truck, you’re going to need the best helper springs on the market. And, rest assured, you don’t need to spend a lot of money to get the very best!

Remember: A helper spring with the unique combination of strength, stability, smoothness, and reliability under load is the key to the complete driving satisfaction of your Toyota Tundra... And it’s only available with Timbren SES upgrades.